PROCEED AMP2 Guía de usuario Pagina 153
- Pagina / 175
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
143
Chapter 6 Input/Output Modules and Options
Adding/Removing Modules
Precautions
Before unpacking your new module, make sure you have a static-free
surface on which to work.
Requirements
• A small Phillips screwdriver
• A wrench, preferably an adjustable one
• If you are adding hardware, the components of the option kit you
want to add
• If you are removing hardware, a static-free bag or container
Adding a Dolby D/E Card
To add a Dolby D/E Card, follow the instructions below.
Important:
After adding or removing a card from the monitor, the software will
automatically recognize the new card configuration, and automatically
implement all appropriate changes to the menu system. No software
upgrades or further modifications are necessary. However, it may take
two minutes for the unit to boot the first time after a card swap. A
message will briefly be displayed, and the user will have to press
Initialize to proceed.
CAUTION!
Static discharge can cause serious damage to sensitive semiconductor
devices. Avoid handling the circuit boards in high static environments
such as carpeted areas, and when synthetic or wool fiber clothing is
worn. Touch the frame to dissipate static charge before removing
boards from a frame, and always exercise proper grounding
precautions when handling circuit boards.
Do NOT add or remove processor cards with system power applied.
Note:
It may prove helpful to place the monitor with the rear panel
facing you for this procedure.
- AMP2-16V Series 1
- Table of Contents 3
- Quick Start 11
- Front Panel Features 12
- User Interface 13
- Chapter 1 Quick Start 14
- II. Create Channel Clusters 17
- Label Text 18
- III. Arrange the Main Screens 19
- Status Data 20
- SMPTE 2020 Metadata 21
- Dolby Digital Sample Rate 22
- Dialogue Level 22
- Dolby Metadata 23
- Getting Support 26
- Installation 27
- Important Safety Instructions 28
- Installation Recommendations 29
- Sympathetic Vibration 30
- Mechanical Bracing 30
- Electrical Interference 30
- FCC Compliance 31
- Rear Panel Connectors 31
- Ref connector of the last 32
- Basic Connections 33
- The “How Do I...” Chapter 35
- Notation 36
- Figure 3–1 Screen Notation 37
- Or simply 37
- Frequently Asked Questions 38
- Readability? 39
- External Surround Sound? 43
- Audio with Video? 45
- Bitstream? 48
- Preset Name 53
- Main Screen as needed 54
- Management Menu 54
- Other Sources? 56
- Hardware Configuration Menu: 58
- Balance 58
- AES or Analog 61
- Output Trim 61
- Monitor 61
- Mixer Configuration Menu 61
- Reference Genlock Input 63
- Clock Source should 64
- Internal 64
- AES Input Configuration 65
- 75-Ohm Term 66
- Features 69
- Monitoring Cluster Selection 70
- Instant Stereo Downmix 71
- Loudness Monitoring 71
- High Quality Audio System 71
- Internal Router and Mixer 72
- Chapter 4 Features 73
- Audio Processor Cards 74
- Genlock Input 74
- Audio Monitoring Delay 75
- Toslink (SPDIF) Optical Input 75
- Standard Format Rate 76
- Main Screen Arrangements 77
- Dolby Zoom 80
- SuperPair Input 81
- Phase Monitoring 81
- Dolby E Line Position Display 82
- Status/Metadata Hot Keys 82
- 32 Complete System Presets 83
- Automated Preset Changes 83
- Bright, Clear Displays 83
- Menu Lock 84
- Menu List 85
- Menu Navigation Overview 86
- Figure 5–1 Menu Tree 87
- 3G SDI I/O Configuration Menu 88
- 5.1 Downmix Parameters Screen 89
- AES Input Configuration Menu 90
- Follow Monitor Mode Controls 92
- Free Mix Mode Controls 93
- Arbitrary 94
- Phase Measurement Menu 94
- Audio Processor Card Menu 96
- Automation Menu 97
- Controls 99
- Cluster Configuration Screen 100
- Chapter 5 Menu List 101
- Configuration Selection Menu 102
- Important: 103
- Save / ExitHelp Cancel 103
- Dolby Zoom hot key you 105
- -28 LKFS 106
- None setting, except 108
- Dolby Zoom Screen 109
- Decoder Configuration Menu 110
- Ethernet Setup Screen 111
- Hardware Configuration Menu 112
- GENLOCK LOST 113
- Hot Key Configuration Menu 115
- 1 Through 8 115
- 9 Through 16 116
- Label Menu 117
- Label field with 118
- Label field 118
- Loudness Measurement Menu 119
- Main Screen 120
- Save / Exit Cancel 121
- Metadata Select Menu 122
- Program Description 123
- Meter Configuration Menu 124
- Option Configuration Menu 129
- Preset Management Menu 130
- Select Menu Lock Combination 132
- Menu button down (from the 133
- Selection Menu 133
- SMTPE 2020 Configuration Menu 134
- Status Select Menu 135
- Unit Information Menu 136
- Label Menu where 137
- Input/Output Modules 139
- Distinctions Among Models 140
- Standard Models 141
- 3G/HD/SD-SDI Card 142
- Connector Pin Outs 143
- AES Input Card 144
- AES Output Card 145
- Analog I/O Card 146
- Menu Modifications 147
- Pin Function Use 148
- Rear Panel Adaptor 150
- Dolby D/E Card 151
- Adding/Removing Modules 152
- Precautions 153
- Requirements 153
- Adding a Dolby D/E Card 153
- Standoff 156
- Screw from the Other Side 156
- Removing a Dolby D/E Card 160
- Adding an I/O Module 161
- WARNING! 162
- Removing an I/O Module 163
- Option Kits 164
- Description 165
- Specifications 167
- Compliance 168
- Standards 168
- Specification Values/Domains 169
- Troubleshooting 171
- Normal Messages 172
- Inconsistent Module List 173
- Error Messages 174
- Serial Port Access 175
Relacionado con productos y manuales para Amplificadores de audio PROCEED AMP2
(7 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.018 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales